How to deal with bubbling on self-adhesive wallpaper: Analysis of hot topics on the Internet in the past 10 days
Recently, the topic of home decoration has been gaining popularity on social media. Among them, "self-adhesive wallpaper bubbling" has become a frequent problem that plagues many DIY enthusiasts. This article combines the hot data of the entire network in the past 10 days to provide you with structured solutions, as well as analysis of relevant hot topics.
1. Top 5 hot topics in home decoration in the past 10 days
| Ranking | topic | heat index | Main discussion platform |
|---|---|---|---|
| 1 | Self-adhesive wallpaper construction tips | 985,000 | Xiaohongshu, Douyin |
| 2 | Tips for saving money on wall renovation | 762,000 | Station B, Zhihu |
| 3 | A Guide to Avoiding Potholes in Rental Housing Renovation | 689,000 | Weibo, Kuaishou |
| 4 | Selection of environmentally friendly building materials | 554,000 | Toutiao, Douban |
| 5 | Old house renovation case sharing | 427,000 | WeChat public account |
2. Analysis of common causes of bubbling of self-adhesive wallpapers
| Reason type | Proportion | Specific performance |
|---|---|---|
| The wall is uneven | 45% | The base layer is dusty or uneven |
| Improper pasting technique | 30% | Not pressing from the center to the surroundings |
| Glue is uneven | 15% | Partial lack of glue or excessive thickness |
| Ambient humidity is too high | 10% | Humid weather after construction |
3. Step-by-step treatment plan
Step 1: Diagnose Bubble Type
●Small bubbles (diameter <2cm): Can be pricked with a needle and then flattened
●Large bubbles (diameter>2cm): Need to be partially re-pasted
●Continuous series of bubbles: It is recommended to redo the entire surface
Step 2: Tool preparation
| Tool name | Purpose | alternative |
|---|---|---|
| utility knife | Cut bubbles | sharp scissors |
| syringe | Replenish glue | Straw + glue |
| scraper | compaction wallpaper | credit card |
| hair dryer | Soften glue | hot water bottle |
Step 3: Practical processing
1. Clean the surface: wipe around the bubbles with a slightly damp cloth
2. Puncture and exhaust: puncture a small hole at the edge of the bubble
3. Injection of glue: slowly inject special glue (about 0.5ml)
4. Compaction repair: flatten radially from the center outwards
5. Maintenance waiting: leave it alone for 24 hours without touching it.
4. Preventive measures (top 3 recommended by popular netizens)
1.Wall preparation: 83% of netizens recommend using wall leveling agent
2.environmental control: It is best to keep the room temperature at 15-25℃ during construction.
3.Construction skills: Adopting "cross positioning method" can reduce the foaming rate
5. Related hot topics Q&A
| question | Frequent answers | adoption rate |
|---|---|---|
| How long does it take to process the foam? | It is best to deal with it immediately after discovery. | 92% |
| Can bubble wallpaper be reused? | Depending on the degree of damage, replacement is recommended | 67% |
| Which wallpaper is less prone to blistering? | Non-woven material has better resistance to blistering | 89% |
Conclusion:Through the analysis of recent Internet hot spots, it can be seen that the issue of self-adhesive wallpaper construction continues to receive increasing attention. Mastering the correct treatment method can not only solve the current blistering problem, but also prevent subsequent problems from occurring. It is recommended to refer to the video tutorials on the Internet before construction and make sufficient preparations.
check the details
check the details
en
